January 1990 Archives by author
Starting: Mon Jan 1 02:31:05 AEST 1990
Ending: Wed Jan 31 07:08:53 AEST 1990
Messages: 260
- XBBS version 7.82
Alphacm
- proper .signature
Alphacm
- Using Wyse-150 Terminals ??
WB3FFV
- dialHA96 driver for Xenix
Perry Minyard 3MTA3
- HELP!!!! Important info needed on Xinca
SALIBA BASSAM ANIS
- Bug in SCO uucp system!
Ken Abrams
- Mapping Some Keys to Other (and Multiple Keys)
Ashley M. Aitken
- Xenix Executables
Scott Amspoker
- Manners when asking for information
Scott Amspoker
- Who uses 'adb' debugger?
Jim Anderson
- Manners when asking for information
Dr. T. Andrews
- SCO Compiler/Linker Problem
Dr. T. Andrews
- tape drives
Lance N. Antrim
- A general Thanks
David Arasmith
- Zmodem setup (sz/rz)
Inge Arnesen
- A Composite Message (Mostly FilePro & SCO Xenix)...
Mowgli Assor
- memset, strlen, etc., redeclarations!!!! >:-() ARGH! SCO UNIX!
Mark J. Bailey
- Linking two Xenix Systems
Jonathan Bayer
- Xenix Multi-tape backup
Jonathan Bayer
- Computone board for dial in/out modem - anybody make it work
John Beaudin
- cpu boot: loops when ATI Super VGA board is in VGA mode
John Beaudin
- Flow control with HST
Brett Behm
- Computone board for dial in/out modem - anybody make it work
Frank Bicknell
- Grpahics on *nix (Was: Graphic Output on Dot Matrix)
Frank Bicknell
- Computone board for dial in/out modem - anybody make it work
Frank Bicknell
- CGA and VP/ix
Peter Black
- Bug in SCO uucp system!
Bill Blue
- Computone board for dial in/out modem - anybody make it work
Bill Blue
- Computone board for dial in/out modem - anybody make it work
Gary Blumenstein
- Computone board for dial in/out modem - anybody make it work
Scott Boake
- Speeding up a 2 disk Xenix/386-2.3.1 system
Tan Bronson
- 33Mhz Portable/Luggable or DIY?
Russell Brown
- Computone board for dial in/out modem - anybody make it work
Aaron Burns
- computone intelligent ca4rds
Aaron Burns
- Computone board - need info
Aaron Burns
- Ansi termcap entry
Aaron Burns
- Tape backup for Xenix and DOS
Randy Bush
- ATI mouse
BARRY A. COMER
- VGA Wonder video modes??
BARRY A. COMER
- Xenix Multi-tape backup
Bill Campbell
- cc on 2.3.2 Xenix with 2.2 Devel Sys
John Campbell
- cc on 2.3.2 Xenix with 2.2 Devel Sys
John Campbell
- paint/draw program for XENIX/DOS (PD)
Edwin R. Carp
- Bug in SCO uucp system!
Edwin R. Carp
- Bug in SCO uucp system!
Edwin R. Carp
- High Performance Disk Systems
Edwin R. Carp
- FIORDCHK
Edwin R. Carp
- Need Suggestions; Menu Software
Jim Carter
- all
Jim Carter
- gdb for Xenix?
Seth Chaiklin
- DOS utility for reading xenix diskettes
Bill Chen
- help on MICROPOLIS 1568 HD
Lin Chen
- ATI VGA Wonder (was Re: Use a 386 unix as a home machine?).
Gary Coffman
- installing X
Barry Comer
- Super VGA
Barry A. Comer
- using a 80287 with a 80386
Barry A. Comer
- Xenix BBS?
Vicka Corey
- Terminal locking up
Robb Cutler
- cc on 2.3.2 Xenix with 2.2 Devel Sys
Mark J. DeFilippis
- moving news area
Mark J. DeFilippis
- Where is alphacm?
James Deibele
- ATI VGA Wonder (was Re: Use a 386 unix as a home machine?).
Karl Denninger
- PC-VT Version 10.0 Now Available
Mark DiVecchio
- Some really easy questions (batteries not included)
Steve Dyer
- Worm Drives on Xenix?
Dave Egan
- Worm Drives on Xenix?
Dave Egan
- Arnet Smartports & H-P
Dave Fenske
- mscreencap fot vt220 (vt100) ?
Axel Fischer
- Computone board for dial in/out modem - anybody make it work
Bradley W. Fisher
- Northgate experiences please
Barton A. Fisk
- northgate experiences (summary: a bit long)
Barton A. Fisk
- Using speeds above 9600 on a dumb serial port
Barton A. Fisk
- writing messages to the status line of a terminal
Barton A. Fisk
- Grief (DOS Brief clone) editor
Dick Flanagan
- Crisp (was: Grief (DOS Brief clone) editor)
Dick Flanagan
- Logging in on TB+ at 19.2
Dick Flanagan
- Fax board for Xenix/DOS 386
Douglas Floer
- emacs to XENIX-386.
Joakim Fredriksson
- Xenix Multi-tape backup
G. Simon Gales
- Xenix Multi-tape backup
G. Simon Gales
- all
Carl E. Garringer
- AT interface under xenix/386 2.3.2
G Geers
- XBBS version 7.82
Paul Gillingwater
- tape drives
Richard Goerwitz
- tape drives
Richard Goerwitz
- 2.3.0 development system
Richard Goerwitz
- Maintaining releases (Re: XBBS version 7.82)
Piercarlo Grandi
- Smart Mailer For Xenix
Mark Gregson
- Computone board - need info
Macy Hallock
- FIORDCHK
Dave Hammond
- select() system call
Jeff Holmes
- Curses
Jeff Holmes
- FIORDCHK
Jeff Holmes
- Ansi termcap entry
Jeff Holmes
- SCO Compiler/Linker Problem
Mike Howard
- sar -d on UNIX 3.2
Terry Hull
- Manners when asking for information
Terry Hull
- Archive 40MB Floppy Tape and Xenix 2.3.2
Alex Huppenthal
- ISC update
John E Van Deusen III
- Xenix Executables
UseNet Id.
- Manners when asking for information
UseNet Id.
- Altos, anyone?
Donald K. Irmiger
- Spec'n out a PS/2 Xenix box
Alden Jackson
- Northgate experiences please
Jeff Sullivan, x4096 MS 4-2
- Novell/Token Ring Device Drivers
Jeff Jennings
- Is 1024X768 VGA OK for X window ?
Woochang Jin
- all
David Hughes Jr
- Smart Mailer For Xenix
Wm E Davidsen Jr
- Compuadd ESDI and UNIX (again)
Wm E Davidsen Jr
- Xenix Executables
Wm E Davidsen Jr
- Re^2: Need Suggestions; Menu Software
Wm E Davidsen Jr
- AT interface under xenix/386 2.3.2
Wm E Davidsen Jr
- Computone board for dial in/out modem - anybody make it work
Wm E Davidsen Jr
- Speeding up a 2 disk Xenix/386-2.3.1 system
Wm E Davidsen Jr
- Xenix Multi-tape backup
Wm E Davidsen Jr
- Compuadd ESDI and UNIX - Summary
Wm E Davidsen Jr
- Manners when asking for information
Wm E Davidsen Jr
- gdb for Xenix?
Wm E Davidsen Jr
- fax for Xenix
Wm E. Davidsen Jr
- Manners when asking for information
Bruce KING
- Manners when asking for information
Bruce KING
- Manners when asking for information
Bruce KING
- Linking two Xenix Systems
Robert R. Kessler
- Manners when asking for information
Wolf Kozel
- BSD 4.3 talk(1) ported to XENIX 386 w/ SCO TCP/IP
Samuel Lam
- The UUCP 'f` Protocol??
Thomas Lamy
- X-Windows
Milton Lau
- Bellcore window system MGR for 386pc running Xenix
Chain Lee
- Who uses 'adb' debugger?
Clement Lee
- Bug in SCO uucp system!
Bob Leffler
- Manners when asking for information
Michael S. Lueke
- Computone board for dial in/out modem - anybody make it work
Stuart Lynne
- fax for Xenix
Stuart Lynne
- logging in 7bit vs 8bit
1770 MCI
- fax for Xenix
Bharat Marathe
- Sony CD Rom drives
Paul Martin
- Flow control with HST
Paul Martin
- Using speeds above 9600 on a dumb serial port
Paul Martin
- Speeds above 9600 (using flow control)
Paul Martin
- Manners when asking for information
Paul Martin
- Northgate experiences please
Andrew P. Mullhaupt
- UDS V.32 not yet dialing out for me...
Andrew P. Mullhaupt
- UDS V.32 not yet dialing out for me...
Andrew P. Mullhaupt
- Menu software... version 1.35 upgrade to "lush" part 1/1
Pat Myrto
- List of SCO Xenix System V rel 2.1.x commands {WANTED}
Tim Nelson
- Re^2: Need Suggestions; Menu Software
Con Neri
- Computone board for dial in/out modem - anybody make it work
Scott O'Connell
- tape drives
Scott O'Connell
- Looking for menu-based user interface
Jim O'Connor
- Xenix Executables
Rick Odeen
- ATI VGA Wonder (was Re: Use a 386 unix as a home machine?).
Tony Olekshy
- ATI VGA Wonder (was Re: Use a 386 unix as a home machine?).
Tony Olekshy
- fax for Xenix
Tris Orendorff
- Xenix Multi-tape backup
Larry Pajakowski
- Hercules Mono. Not Working Properly
John Palmer
- XBBS version 7.82
Bob Palowoda
- Xenix Executables
Bob Palowoda
- Using Pcomm on sco xenix 386
Frank C. Paterra
- Northgate experiences please
Kelly Pearce
- How to unspool news manually?
John Petersen
- Faster disk driver & "Remote" for XENIX
Alex Pournelle
- Oh ja,
RICHARD RONTELTAP
- Xenix Executables
Bob Reineri
- Computone board for dial in/out modem - anybody make it work
Frank I. Reiter
- SCO 3.2 UNIX & Dev System
Bob Rieger
- help on MICROPOLIS 1568 HD
Fred Rump
- Logging in on TB+ at 19.2
Maxim Samo
- Xenix Multi-tape backup
Mike Sanfratello
- Telebit Trailblazer Plus PC modem cards for sale (cheap)
Patricia Santry
- Who uses 'adb' debugger? ( Debugger in general )
Kirtikumar Satam
- "Remote" for XENIX
Wayne Schlitt
- Grpahics on *nix (Was: Graphic Output on Dot Matrix)
Louis Schmittroth
- Which mouse for Xenix and Vpix
Louis Schmittroth
- EGA 43x120 mode
Richard Schneider
- Flow control with HST
Christian Seyb
- Need Suggestions; Menu Software
Paul Shields
- Hacking a dumb serial card...
Paul Shields
- Menu software... Here it is: "lush" version 1.34, part 1/2
Paul Shields
- Menu software... Here it is: "lush" version 1.34, part 2/2
Paul Shields
- Menu software... version 1.35 upgrade to "lush" part 1/1
Paul Shields
- Menu software... "lush" version 1.34, 1.35...
Paul Shields
- Looking for terminal software with transparent file transfer
Paul Shields
- Xenix Executables
Peter da Silva
- Anyone have Exabyte up on 286/386 *ix box?
Arthur B. Smith
- XMODEM,YMODEM,ZMODEM,KERMIT Which is best and why?
Larry Snyder
- Where is alphacm?
Larry Snyder
- cc on 2.3.2 Xenix with 2.2 Devel Sys
Larry Snyder
- ATI VGA Wonder (was Re: Use a 386 unix as a home machine?).
Larry Snyder
- The UUCP 'f` Protocol??
Larry Snyder
- Flow control with HST
Larry Snyder
- Computone board for dial in/out modem - anybody make it work
Larry Snyder
- Computone board for dial in/out modem - anybody make it work
Larry Snyder
- dialHA96 driver for Xenix
Larry Snyder
- Computone drivers under 386/ix
Larry Snyder
- UDS V.32 not yet dialing out for me...
Larry Snyder
- Computone board for dial in/out modem - anybody make it work
Pentti Soini
- fax for Xenix
Systems Staff
- fax for Xenix
Systems Staff
- MLINK
Robert Story
- e-mail protocols
Robert Story
- Profiling on Xenix 2.3.2?
Kayvan Sylvan
- Anyone have an address for equinox?
Mark Tapper
- how to get biz.clarinet ?
Brad Templeton
- Graphic interface for 386/ix
Hubert Eing/Hubert Eing Textilveredlung
- Tape backup for Xenix and DOS
Matthew Thurmaier
- Tape backup for Xenix and DOS
Dan Ts'o
- MLINK
Dan Ts'o
- Xenix watchdog question?
Tyrone Ussery
- Manners when asking for information
Bill Vermillion
- moving news area
Jack F. Vogel
- Computone board for dial in/out modem - anybody make it work
Stan Voket
- Bug in SCO uucp system!
WA7KGX
- Northgate experiences please
WA7KGX
- fax for Xenix
Amanda Walker
- Zmodem setup (sz/rz)
David Ward
- Xenix Multi-tape backup
David Ward
- Who uses 'adb' debugger?
Aryeh M. Weiss
- FIORDCHK
Aryeh M. Weiss
- High Performance Disk Systems
Greg Wettstein
- fax for Xenix (and DOS)
Dan Wexler
- UUCP connect error
Bob Willey
- moving news area
Bob Willey
- computone intelligent ca4rds
Bob Willey
- RPC
Scott Williamson
- Help with Unix/Xenix!
Timothy Winslow
- serial I/O, vpix, COM3/COM4, 2 questions
Daniel Wynalda
- com3, vpix, problems
Daniel Wynalda
- Who uses 'adb' debugger?
Doug Toppin X2075
- Floating point emulator bug?
Pim Zandbergen
- Smart Mailer For Xenix
Netnews account
- xmodem transfers
hank barta
- Xenix Executables
bill brothers
- Help on changing swap space size
slk at cbnewsc.ATT.COM
- File Permissions (security)
Cliff Manis cmanis at csoftec
- how to get biz.clarinet ?
Cliff Manis cmanis at csoftec
- vspell
Anthony_Mak_Fiorentino at cup.portal.com
- UUCP connect error
David Herron -- a slipped disk
- CORRUPTED FILES
WSHB employee
- CGA and VP/ix
jhl at frith.egr.msu.edu
- Bell Tech. ICC Multiport Card ?
jhl at frith.egr.msu.edu
- Using Pcomm on sco xenix 386
egray at fthood.UUCP
- Need Info on Multiport adapters
uhclem at hal6000.tandy.com
- Xenix 386 Mail help!?
mark
- Bug in SCO uucp system!
mel
- Graphic Output on Dot Matrix
mel
- How to unspool news manually?
mel
- Bug in Xenix Uucp
neal at mnopltd.UUCP
- fax for Xenix
neal at mnopltd.UUCP
- "Remote" for XENIX
neal at mnopltd.UUCP
- Xenix 386 Mail help!?
neal at mnopltd.UUCP
- Bug in uucp
neal at mnopltd.UUCP
- EGA 43x120 mode
neal at mnopltd.UUCP
- Grpahics on *nix (Was: Graphic Output on Dot Matrix)
neal at mnopltd.UUCP
- Computone board for dial in/out modem - anybody make it work
kirk moore
- tape drives
root
- Make: Out of memory
mitchemt at silver.bacs.indiana.edu
- Tape backup for Xenix and DOS
dsmith at simpact.com
- Manners when asking for information
uhclem at trsvax.UUCP
- Anyone have an address for equinox?
uhclem at trsvax.UUCP
- Looking for a good '386 disassembler
Rob Peglar x615
Last message date:
Wed Jan 31 07:08:53 AEST 1990
Archived on: Mon Feb 1 19:52:31 AEST 2016
This archive was generated by
Pipermail 0.09 (Mailman edition).